Crosshair Mark - Omano CX-3 User Manual

Omano CX-3 Camera User Manual
（1） The cursor points to A, the real-time automatic white balance function will be
started by pressing the "right button" and the color of the letter ​
（2） The cursor points to S, the single automatic white balance function will be
started by pressing the "right button" and the color of the letter ​
（3） The cursor points to M, the manual white balance can be started by pressing
the "right button" and the color of the letter ​
value will also appear on the right side. The flashing red number is the
value currently been selected. Press the "top button" or "bottom button" to
change the current number value (the valid adjustment range is1-255). Press
the "right button" to switch the value R, G and B consequently.
Whichever value letter (R／G／B) is selected, as long as the "left button" is pressed,
RGB current number value will be saved.
Note: From automatic white balance to manual white balance: the value of manual
white balance is the white balance under the current background. From single automatic
white balance to manual white balance: the value of manual white balance is the
previous single automatic white balance.
8）Crosshair mark
When in camera or recording mode, long press the "right button" to activate the
crosshair mark and then long press the "right button" to de-activate the crosshair mark.
The default cross line invoked by shortcut key is the first kind. If either of the other two
shortcut keys of the cross line is needed, other cross lines will be firstly invoked via
menu and current cross line is controlled by shortcut key.
There are three kinds of crosshair marks ("crosshair mark" menu can be found in
menu bar)：
1．Cross (default)
2．Grid
3．Concentric circles
A ​
S ​
M ​
will turn red and a group of
KS070800G4-Ver1.1
will turn red.
will turn red.
the