White Balance Adjustment - Omano CX-3 User Manual

Omano CX-3 Camera User Manual
the "top button" or the "bottom button" to select the menu bar "exposure EV" and then
press the "right button" to enter the exposure setup interface.
The screen will show the icon . (Note: Flashing font = the cursor is located in current
position. Red font = status of been selected. )
Press the "top button" or "bottom button" to move the cursor. Press the "right button"
to select the current status and the font color will turn red. Press the "left button" to
exit the exposure setup interface.
（1） The cursor points to A, the real-time automatic exposure function will be started
by pressing the "right button" and the color of the letter ​
（2） The cursor points to S, the single real-time automatic exposure function will be
started by pressing the "right button" and the color of the letter ​
（3）The cursor points to M, the manual exposure can be started by pressing the "right
button" and the color of the letter ​
will also appear on the right side. Press the "top button" or "bottom button" to
change the current number value (the valid adjustment range is -10~+10 and the
default value is 0). Press the "right button" to save the number value and the
number value will be covered simultaneously.
7）White balance adjustment
When in camera or recording mode, press the "left button" to enter the menu bar. Press
the "top button" or the "bottom button" to select the menu bar "white balance WB"
and then press the "right button" to enter the interface of the white balance setup.
Now the screen will display the icon .
Press the "top button" or the "bottom button" to move the cursor. Press the "right
M ​
will turn red and a flashing red number 0
A ​
w ill turn red.
S ​
w ill turn red.
KS070800G4-Ver1.1