Initial Setup - VTech Frozen II Magic Colour Clock Parents' Manual

TRANSFORMER SAFETY NOTICE
Using a VTech
•
• This toy shall only be used with a transformer for toys.
• The transformer is not a toy.
• This toy is not intended for use by children under 3 years old.
• Do not connect the toy to more than the recommended number of power
supplies.
• Never clean a plugged in electronic device with liquid.
• Please regularly examine the transformer, checking for damage to the cord,
plug, transformer or other parts. Do not use the transformer if there is any
damage to it.
Note:
If the unit stops working or the sound becomes weak, it may be a result of the
adaptor connection. Unplug the adaptor for 15 seconds. Next, plug the adaptor
back in and turn the unit ON. If the problem persists, the adaptor you are using
may be faulty.
TO BEGIN USING THE FROZEN II
MAGIC COLOUR CLOCK
TRY ME MODE
If you've just taken the Frozen II Magic Colour Clock out
of the packaging for the first time, you need to disable the
Try Me Mode before playing.
To disable the Try Me Mode, press the OK button to wake
up the unit and then press the Projection button to exit the Try Me Mode.
INITIAL SET-UP
Press any button to turn the unit on. When the unit is first turned on, you will
be asked to set the time.
TIME SET-UP
The default time is 8:00 in 24 hour mode.
• Press the OK button to highlight the next item:
Hour, Minute, am / pm (only in 12 hour mode)
adaptor (AC/DC 7.5V
®
400mA) is recommended.
/ , 12 / 24 hr.
9