Standby Mode; Light Control; Volume Control - VTech Frozen II Magic Colour Clock Parents' Manual

• Press the /
• To save the current settings, press the OK button when the tick icon
highlighted. Or else, you can press the
icon to reset the time.

STANDBY MODE

To preserve battery life, the Frozen II Magic Colour Clock will automatically
enter standby mode if there is no operation for a period of time. You can also
press the Clock button to go to standby mode if you are already in clock mode.
The current time will display even in standby mode. Press any button to wake
the unit up.
MAGIC SENSOR CONTROL
A magic sensor detects your hand movement, wave
your hand left and right to activate it. You will be able
to select different light effects and play the games using
this method.
The magic sensor is available only if the magic sensor
icon is shown at the top of the screen.

LIGHT CONTROL

Press the light button
on, ambient light off and both lights off.
PROJECTION CONTROL
The Frozen II Magic Colour Clock will project the current time onto the
ceiling.
Press the projection button
Rotate the projector focus lens clockwise or anticlockwise to adjust the focus
of the projection display.
Rotate the projection angle adjuster to adjust the projection angle.

VOLUME CONTROL

Press the volume button
/ buttons to decrease or increase the volume.
Press the volume button again or any function button to save
the current settings.
buttons to adjust the value.
to switch between ambient and screen display lights
to turn the time projection on or off.
to adjust the volume. Use the
/ buttons to choose the reset
is
10