Timer Recording; About Timer Recording; Timer Recording (G-Code System) - Philips RTH718/98 User Manual

Timer Recording

About timer recording

Use 'Timer Recording' to automatically
start and stop a recording at a later
date/ time. The recorder will tune to the
right program channel and begin
recording at the specifi ed time.
With this recorder, you can pre-program
up to 20 recordings.
To make a timer recording, your
recorder needs to know:
– The date you want to make the
recording.
– The recording input source.
– The start and stop time of the
recording.
– The mode of record quality, see
"Before Recording - GENERAL
settings".
SELECT
TIPS: Set the appropriate mode of record quality for HDD recording, the same record quality will be transferred
from HDD to a recordable DVD.
44
Timer recording (G-CODE
System)
This is a simple programming system for
recorders. To use it, enter the G-CODE
programming number associated with
your television program. You can fi nd
this number in your TV listings magazine.
All the information needed by the
recorder for programming is contained in
the programming number.
A
Turn on the TV power. Select the
correct Video In channel at the TV.
If you are recording directly to a
DVD disc, insert the DVD recordable
disc before proceeding to step
B
Press TIMER on the remote control.
OK
TIMER
C
Use
available empty slot and press OK.
The G-CODE
appears.
The timer schedule list appears.
Timer Schedule
Source Rec Mode Date Start
1
2
3
4
5
6
keys to highlight the next
®
System setup menu
G- System
CODE
Enter the G- programming
CODE
number for the show you wish to
record. Press CANCEL for manual
timer recording. To go back to timer
schedule press [RETURN].
CONFIRM MANUAL
OK
®
®
B
.
End Rec To
OK