English - Black & Decker TO670 Manual

TO670 TOASTER OVEN
TO770 CONVECTION-ROTISSERIE OVEN
Thank you for choosing Black & Decker. We hope
that you will enjoy using this product for many years.
OVERVIEW (fig. A)
1. Timer dial, on/off switch
2. Power indicator lamp
3. Function dial
4. Temperature dial
5. Carrying handles
6. Glass door
7. Door handle
EC DECLARATION OF CONFORMITY
TO670/TO770
Black & Decker declares that these
products conform to:
89/336/EEC, 73/23/EEC, EN 55014,
EN 60335, EN 61000
Kevin Hewitt
Director of Consumer Engineering
Spennymoor, County Durham DL16 6JG,
United Kingdom
INTENDED USE
Your Black & Decker toaster oven has been
designed for baking, roasting, toasting and
grilling. This product is intended for household
use only.
WARNING SYMBOLS
The following symbols are used in this manual:
Denotes risk of personal injury or damage
to the product in case of non-observance
of the instructions in this manual.
Denotes risk of electric shock.
IMPORTANT SAFEGUARDS
Warning! When using mains-powered appliances,
N
basic safety precautions, including the following,
should always be followed to reduce the risk of
fire, electric shock and personal injury.
Read this entire manual carefully before using
N
the appliance.
The intended use is described in this manual.
N
The use of any accessory or attachment or the
performance of any operation with this
appliance other than those recommended in
this instruction manual may present a risk of
personal injury.
Retain this manual for future reference.
N
Using your appliance
Make sure the appliance is switched off by
N
turning the timer dial (1) and the temperature
dial (4) to the off positions before connecting
to or disconnecting from the power supply.
The door glass and the outside surfaces of the
N
oven get very hot during use. Oil and other
cooking liquids may also get very hot during use.
Always wear oven gloves when opening the door
and when removing trays from the oven.
Always take care when using the appliance.
N
Make sure that the oven does not obstruct the
N
socket used. The power supply cord should
not touch the unit during use or during the
cool down period.
Never pull the power supply cord to
N
disconnect the plug from the socket. Keep the
power supply cord away from heat, oil and
sharp edges. Do not let the power supply cord
hang over the bench top edge.
Do not cover trays or other parts with metal foil
N
as this may cause overheating.
E N G L I S H
5