Black & Decker KA270 Manual page 9

Cleaning the dust cassette filter
The dust cassette filter is re-usable and should be cleaned
regularly.
Empty the dust cassette (3) as described above.
x
Pull the filter (26) off the dust cassette.
x
Shake off excess dust by tapping the filter into a dustbin.
x
Warning! Do not brush or use compressed air or sharp
objects to clean the filter. Do not wash the filter.
Replace the filter.
x
Refit the cover.
x
Refit the dust cassette onto the tool.
x
Hints for optimum use
For user comfort, the tool can be operated with one or
x
two hands (fig. Q). Do not place your hands over the
ventilation slots.
Do not exert too much pressure on the tool.
x
Regularly check the condition of the sanding sheet.
x
Replace when necessary.
Always sand with the grain of the wood.
x
When sanding new layers of paint before applying
x
another layer, use extra fine grit.
On very uneven surfaces, or when removing layers of
x
paint, start with a coarse grit. On other surfaces, start
with a medium grit. In both cases, gradually change to
a fine grit for a smooth finish.
Consult your retailer for more information on available
x
accessories.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Clear the cooling vents and slots with a clean, dry paint
x
brush.
Clean the housing with a clean, damp cloth. Do not use
x
solvents.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
Voltage
Power input
Oscillations (no load)
Orbits (no load)
Weight
EC declaration of conformity
Black & Decker declares that these products conform to:
98/37/EC, 89/336/EEC, EN 60745, EN 55014, EN 61000
L (sound pressure) 78 dB(A), L
pA
hand/arm weighted vibration 8.8 m/s
K (sound pressure uncertainty) 3 dB(A),
pA
K (acoustic power uncertainty) 3 dB(A)
WA
Spennymoor, County Durham DL16 6JG,
ENGLISH
KA270
V 230
AC
W 170
min -1 11,000
-1
min 22,000
kg 1.53
KA270
(acoustic power) 89 dB(A),
WA
2
Kevin Hewitt
Director of Consumer Engineering
United Kingdom
1-5-2005
9