Download Print this page

Occasions Airflowz Series Instructions page 2

Light up inflatable instructions

Advertisement

SAVE THESE INSTRUCTIONS
Installation
PREPARING FOR INSTALLATION
1. Remove contents from packaging
2. Remove all plastic fasteners and tags. These are part of the packaging and should be discarded.
3. Before beginning assembly of product, make sure all parts in the content list are present. If any
part is missing or damaged, do not attempt to assemble the product.
Package Contents
Part Description
Quantity
A
Inflatable Unit with
1 PIECE
UL Listed adapter
(Input 120V, AC 50/60Hz,
Output 12V, DC 1.5A)
B
Tether ropes
4 PIECES
C
Tether stakes
4 PIECES
D
Stakes
2 PIECES
Assembly Introduction
1. Lay out deflated inflatable on a clear and flat
area with fan at the back facing up. Make
sure the air intake is clear of fabric or other
obstructions.
2. Ensure zipper on inflatable is fully closed.
3. Plug the adapter into a power unit. Inflatable
will start to inflate.
4. For outdoor use, tie tether ropes to the
stakes, clip the nylon loops on the side of
inflatable, then insert stakes to the ground
making sure tethers are taut.
5. Adjust the sealed weight-bag to position
your inflatable.
6. To deflate, unplug adapter and the fan will
stop blowing.
7. Unzip the zipper for faster deflation.
A
B
C
D
1
2
Fan
facing
up
3
4
5
weight-bag
Caution:
1. For even better night time illumination, you may choose to place an outdoor approved spotlight
in front of your inflatable. (Outdoor approved spotlight not provided). Do not place the bulb too
close to the inflatable as it may melt or damage the plastic.
2. Do not place any foreign objects inside your inflatable.
3. Do not block air intake area of your inflatable; it will increase the inflation time.
4. During inclement weather conditions such as heavy rain, snow and windstorms, store the
product indoors.
5. Operation of your inflatable during extreme weather conditions is not recommended.
6. Do not store the inflatable when it is wet.
Important Safety Instructions: Power Unit
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
When using electrical products, basic precautions should always be practiced including the following:
1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2. Read and follow all instructions that are on the product or provided with the product.
3. Do not use an extension cord.
4. Reference the National Electrical Code, ANSI/NFPA 70, specifically for the installation of wiring and
clearances from power and lighting conductors.
5. Installation work and electrical wiring must be done by qualified person(s) in accor dance with all
applicable codes and standards, including fire-rated construction.
6. Do not install or use within 10 feet of a pool.
7. Do not use in a bathroom.
8. WARNING: Risk of Electric Shock. When used outdoors, install only to a covered Class A GFCI protected
receptacle that is weatherproof with the power unit connected to the receptacle. If one is not provided,
contact a qualified electrician for proper installation. Ensure that the power unit and cord do not interfere
with completely closing the receptacle cover.
9. WARNING: Risk of Fire. Installation involves special wiring methods to run wiring
through a building structure. Consult a qualified electrician.
10. WARNING: Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the ground surface.
11. Do not to use with receptacles that are weatherproof only when the receptacle is covered (attachment
plug cap not inserted and receptacle cover closed).
SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for
power units.
3
4

Advertisement

loading