Occasions AIRFLOWZ Instructions

W H I S P E R S Y S T E M
Safety Information
Please read and understand this entire manual before attempting to assemble, operate or
install the product.
- This item is not a toy and should be used for decorative purposes only.
- For indoors and outdoors use.
CAUTION:
Do not attempt to inflate your inflatable during unusually strong winds. If it becomes too windy for
safe operation, simply allow your inflatable to deflate and wait for better conditions before
re-inflating.
CAUTION:
Protect the electric fan and power cord from direct exposure to water. This precaution will reduce
the risk of electrical shock. When the temperature is below 14°F (-10°C), the motor may tempo-
rarily stop running. The motor will begin functioning again in higher temperatures.
Warning: Read And Understand All Instructions
- Failure to follow all instructions listed below, may result in electric shock, fire and /or serious
personal injury.
WARNING : ELECTRICAL PRODUCT
- Keep away from children. Not recommended for children under 3 years of age. As with all
electrical products, precautions should be observed during handling and use to reduce the risk
of electric shock. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
DANGER
- To prevent electric shock, do not immerse in water; wipe clean with damp cloth. Immersing this
product can result in an electric shock.
IMPORTANT NOTE:
Periodically examine this product for damage to the cord, housing or other parts that may result
in the risk of fire, electric shock or injury. If the product is damaged, do not use it.
Light Up
Inflatable
Instructions
1
Important Safety
Instructions
Read And Follow All
Safety Instruction
When using electrical products, basic
precautions should always be followed,
including the following:
- This is an electrical product – not a toy! To
avoid risk of fire, burns, personal injury, and
electric shock, it should not be played with or
placed where small children can reach it.
- Do not use seasonal products outdoors unless
marked suitable for indoor and outdoor use.
When products are used in outdoor applica-
tions, connect the product to a Ground Fault
Circuit Interrupting (GFCI) outlet. If one is not
provided, contact a qualified electrician for
proper installation.
- This seasonal use product is not intended for
permanent installation or use.
- Do not mount or place near gas or electric
heaters, fireplaces, candles, or other similar
sources of heat.
- Do not secure product wiring with staples or
nails or place on sharp hooks or nails.
- Do not let lamps rest on the supply cord or on
any wire.
- Unplug the product when leaving the house,
when retiring for the night, or if left
unattended.
- Do not use this product for other than its
intended purpose.
- Do not hang ornaments or other objects from
cord, wire, or light string.
- Do not close doors or windows on the
product, or extension cords, as this may
damage the wire insulation.
- Do not cover the product with a cloth, paper,
or any material not part of the product when
in use.
- Do not place the product against carpeting,
furniture, or any other fabric when in use.
- This product has a polarized plug (one blade
is wider than the other) as a feature to reduce
the risk of electric shock. This plug will fit in a
polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If
the plug still does not fit, contact a qualified
electrician. Do not use an extension cord
unless the plug can be fully inserted. Do not
alter or replace the plug.
- Before using and reusing, inspect the product
carefully. Discard any products that have cut,
damaged or frayed wire insulation cords,
cracks, lamp holders or enclosures, lose
connections, or exposed copper wire.
- When storing the product, carefully remove
the product from wherever it is placed,
including trees, branches, or bushes, to avoid
any undue strain or stress on the product
conductors, connections and wires.
- When not in use, store neatly in a cool dry
location protected from sunlight.
- Read and follow all instructions that are on the
product or provided with the product.
SAVE THESE
INSTRUCTIONS
Installation
PREPARING FOR INSTALLATION
1. Remove contents from packaging
2. Remove all plastic fasteners and tags. These
are part of the packaging and should be
discarded.
3. Before beginning assembly of product, make
sure all parts in the contents list are present.
If any part is missing or damaged, do not
attempt to assemble the product.
2