Table of Contents
Advertisement
Basic Operations
Switching the system on/off
●
Press STANDBY -ONB (B on the remote).
●
Press DISC, TUNER or AUX on the remote.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY -ONB (B on the remote).
➜
The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected mode, source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.
Volume control
Turn VOLUME (-/+) clockwise or anticlockwise
(or press VOL +/- on the remote) to increase
or decrease the volume level.
➜
"VOL XX" is displayed on the display panel.
"XX" denotes the volume level.
To switch off the volume temporarily
●
Press MUTE on the remote.
➜
Playback will continue without sound and
"MUTING" flashes.
●
To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Sound control
DBB
DBB enhances the bass response.
●
Press DBB on the remote to enable/disable
DBB feature.
➜
Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.
20
DSC (Digital Sound Control)
DSC provides a different type of preset sound
equalizer setting.
●
Press DSC on the remote repeatedly to select:
CLASSIC, JAZZ, ROCK, POP or FLAT (for DVD:
NORMAL, CONCERT, DRAMA, ACTION or
SCI-FI).
LOUDNESS
LOUDNESS feature enables the system to
automatically increase the treble and bass sound
effect at low volume (the higher the volume, the
lower the treble and bass increase).
●
Press LOUDNESS on the remote to enable or
disable LOUDNESS feature.
➜
icon appears/disappears after this feature
is enabled/disabled.
MOVING SPEAKERS
DVS (Dolby Virtual Speaker) technology creates
a highly compelling 5.1-channel listening
experience from as few as two speakers, making
it an ideal entertainment solution for locations
where space for multiple speaker setup is limited.
This feature enables you to switch between the
surround sound mode and the ordinary music
mode.
●
Press MOVING SPEAKERS to switch
between the surround sound mode and
ordinary music mode.
➜
When the surround sound mode is enabled,
a MOVING SPEAKERS icon will appear on the
display panel and the top parts of the left and
right front speakers will swivel sideways to
achieve the moving surround effect.
Hide quick links:
Advertisement
Table of Contents
