Jupiter System Operating Instructions Manual page 9

JUPITER system and Messerschmidt system
Mounting/removing the attachment
See operating instructions for the
Milling grain
CAUTION Rotating parts can cause injury!
• Never put your hand into the attachment when the mo-
tor is running.
• The grain mill attachment may only be operated when
it is completely assembled, with the filling hopper
tached.
NOTE Damage as a result of using grains that
are unsuitable for milling!
•
Grinding corn will destroy the milling head.
• Only grind oilseeds on a medium setting. Otherwise the
milling head can become clogged.
NOTE Running the mill while empty can cause
damage!
Do not allow the grain mill attachment to run for more
than a few moments when empty. Leaving it run while
empty for any longer can lead to increased wear.
IMPORTANT:
• Only process dry and cleaned grains. Moist grains will
clog the milling head!
• On first use, grind approx. 50 g of grain on a medium
setting. Do not use the flour produced.
• Always let the grain mill attachment run until it is empty,
or empty it completely after use.
• Place a container under the flour outlet.
• To operate the drive unit, see the operating instructions
for the .
Drive Unit
• Insert the grains to be processed into the filling hopper
of the attachment in portions.
Cleaning
Dishwasher can cause damage!
NOTE
Attachments are not dishwasher-safe.
• Remove the attachment from the drive unit before
cleaning.
• Disassemble the grain mill attachment.
• Only clean the plastic parts using lukewarm water and
washing-up liquid.
• Clean the milling head
dry, hard brush or a scrubber.
• After milling oilseeds, grind some dry grain and then
clean with a brush or a scrubber.
The milling head need not be cleaned after each use.
INFO:
When used as intended, it is cleaned by the milling process
itself. However, it should be cleaned at regular intervals
and after a prolonged period of storage.
Subject to technical changes without notice; no responsibility is accepted for the accuracy of this information.
Drive Unit .
inside and outside with only a
B
Storing grains
Store the grains in a jute sack or in an open cardboard box
in a dry place. Alternatively, you can also store the grains in
the deep freezer, in a suitable container or bag.
Storage
Store the appliance in its original packaging, in a dry, dust-
free and cool place that is out of reach of children.
at-
A
9