Advertisement
Table of Contents
NOTE: eFLUX Accessory Wave Pumps are a LOOP Add-on and MUST
be used with an existing LOOP compatible controller and manifold HUB.
Each eFlux Accessory Wave Pump includes:
Item Description
A
eFlux Accessory Wave Pump
B
Magnet Swivel Bracket Assembly
C
24V DC Transformer, UL® Listed
D
Wave Pump Prefilter
E
Pump Cable Wrapping
Installation - READ SAFETY WARNINGS BEFORE INSTALLATION
Step 1. Ensure all components are unpacked, unwrap cords and ensure there is no damage.
Step 2. Choose a mounting location inside the aquarium vertical wall for your pump. Clean location
of any dirt, algae or calcium deposits.
Step 3. Install cable wrapping around
wave pump cable. This protects the pump
cable from triggerfish, urchins and other
animals that may damage pump cable. Place
pump prefilter over pump end.
Step 4. Carefully separate magnet from
pump and place pump into position in tank.
Attach pump to tank using magnet. Swivel
and adjust pump as desired.
Connecting Accessory Wave Pump to Wave Pump Manifold HUB
Step 5. Determine which pump connection port on the Wave Pump Manifold HUB (sold separately)
you wish to plug wave pump into. Wave pump connection ports #1 & #2 are multi-mode flow
controllable. Pump connection port #3 is for wave pumps running in stream mode ONLY (only flow
rate is adjustable).
Pump #3
DC Input
#1685
Wave Pump
Pump #3
Connection
Manifold HUB
(sold separately)
Pump #2
Connection
(pre-installed)
Magnet
Attachment
Pump #2
DC Input
Pump #1
DC Input
Pump #1
Connection
P3
P1
P2
Communication
Indicator LED Light
Port #1
Port #3
Port #2
Port #4
Micro USB Ports
Page 2
Installation Instructions
Quantity
1
A
1
1
1
1
B
Specifications:
Wave Pump DC Inputs:
Voltage: 24VDC
Max. DC Input per channel: 72w@24VDC
Max. DC Output per channel: 60w@24VDC
Pump Connections:
P1=Pump #1 (Primary Wave Pump)
P2=Pump #2 (Secondary Wave Pump)
P3=Pump #3 (Flow Mode Wave Pump Only)
Micro USB Ports:
Port #1= Communications
Port #2= Wave Pump LED Display
Port #3= Communications
Port #4= Communications
24VDC
C
or
E
Cable Wrapping
Pump Prefilter
(optional)
D
Advertisement
