Emptying The Dirt Tank - Bissell Powerlifter Swivel Pet 2260 Series User Manual

Emptying the Dirt Tank

WARNING
To reduce the risk of electric shock, turn power OFF and disconnect polarized plug from
electrical outlet before performing maintenance or troubleshooting checks.
1
Empty once tank is full.
3
Hold the Dirt Tank over a trash container.
Press the bottom release button to
empty. Once empty, close the lid.
5
Clean cyclone with warm water and mild
detergent. Let cyclone dry completely
before replacing. To replace, fit into place
and twist to the right.
NOTE: The Dirt Tank may be washed in warm water with a mild detergent. Make sure it
is completely dry before replacing.
2
Press the Tank Release Button and pull
out to remove Dirt Tank.
4
Twist cyclone left and pull down to
remove from tank.
6
click
After emptied,
place tank back
on vacuum and
press firmly until
you hear "click".
www.BISSELL.com
7