Cleaning And Maintenance - Bimar S236 Instruction Booklet

Fax +32 030 9904733

CLEANING AND MAINTENANCE

Attention: before cleaning the appliance, switch off, unplug and wait for before it has
completely cooled down.
• To clean the body use a soft damp cloth; do not use abrasive products.
• Do not submerge any part of the heater in water or other liquids; if this should happen, do not
put your hands into the liquid, firstly remove the plug from the power socket. Carefully dry the
appliance and check that all the electrical parts are dry: if in doubt, contact professionally
qualified personnel.
• The cable must be substituted with a special tool: please contact a competent qualified
electrician.
• From time to time clean the grid to remove fluff, dust or other deposits, to improve the
performance . Use a vacuum cleaner or a cloth.
• If you decide not to use the appliance any more, we recommend making it inoperative by
cutting the power cord (after making sure you have disconnected the plug from the socket) and
make dangerous parts harmless if children are allowed to play with them.
Do not dispose of non-biodegradable products in the environment but dispose of them in
accordance with current law. At the end of its working life, the product must not be disposed of as
urban waste. It must be taken to a special local authority differentiated waste collection centre or
to a dealer providing this service. Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving from inappropriate disposal and
enables the constituent materials to be recovered to obtain significant savings in energy and
resources. Bear in mind that: the casing, fan and cover are made of plastic; the electrical wires are
copper coated in rubber. – The electric motor is made of iron and copper. The electrical resistance
is made of ceramic material and iron. – and in particular, the exhausted batteries must be disposed
of respecting the regulations in force.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't
change the page numbering. Keep the language
integrity.
9 20
/
Assembly page 9/20