EN Floor grinding machine FGE 530 1 Important notes 1 Important notes 1.2 Liability and warranty TYROLIT Hydrostress AG The machine may be used only with the accessories supplied by the manufacturer for stripping, wet and All rights, including those pertaining to translation, lie dry grinding of floor surfaces such as: with TYROLIT Hydrostress AG.
EN Floor grinding machine FGE 530 2 Safety All laws and regulations (e.g. the valid regulations on waste disposal), accident prevention guidelines and generally recognised safety rules must be complied with when working on and with the machine. 2.2 Safety instructions Risk of injury from rotating machine parts! Limbs and clothing can be drawn in.
EN Floor grinding machine FGE 530 3 Operating Cleaning and maintenance may be done only by trained personnel. Maintenance needs to be conducted according to the operation manual. Do not use high‐pressure cleaners to clean the machine! Risk of injury from dust formation during grin...
EN Floor grinding machine FGE 530 3 Operating — Operation begins in the standard position If necessary, press the safety cap on the safety [Fig. A]. switch until it snaps in. — The stretched position is intended for tool The surface to be ground can now be machined.
EN Floor grinding machine FGE 530 4 Maintenance In an emergency, the machine can be switched Tip the machine and place it on the floor. off with the EMERGENCY‐STOP button [18, Fig. B] or by pulling off the safety cap 4.3 Mounting and dismantling ETX diamond tools...
EN Floor grinding machine FGE 530 4 Maintenance All locating plates need to be equipped with dia mond tools of the same type and the same quantity. The heights of the diamond tools (de gree of wear) also have to be the same.
EN Floor grinding machine FGE 530 5 Troubleshooting 5 Troubleshooting Only suitably knowledgeable, qualified profes sional technicians may perform repairs on the machine. Malfunction Cause Rectification Machine will not start. The voltage supply has not been pro Join the connecting cable (extension perly connected.
EN Floor grinding machine FGE 530 6 Acceptance and transportation 6 Acceptance and transportation For transporting, the machine can be taken apart into 2 pieces. A relocation over shorter distances is possi ble on the transport wheels. Follow the safety instructions in Chapter 2.
EN Floor grinding machine FGE 530 7 Technical data 7 Technical data 8 Declaration of conformity TYROLIT Hydrostress AG Designation FGE 530 Witzbergstrasse 18 Rated voltage 400 V, 3 CH-8330 Pfäffikon ZH Switzerland Rated frequency 50 Hz We hereby declare that the machine...
Need help?
Do you have a question about the FGE 530 and is the answer not in the manual?
Questions and answers