Related Manuals for TYROLIT Hydrostress FGE 250
Summary of Contents for TYROLIT Hydrostress FGE 250
- Page 1 10999135_en Floor grinding machine FGE 250 Translation of the original operating instructions ......
- Page 2 Fig. A Fig. B Fig. D Fig. E Fig. C Fig. F...
- Page 3 Fig. G Fig. J Fig. K Fig. L Fig. H Fig. J Fig. M...
-
Page 4: Table Of Contents
Translation of the original operating instructions Manufacturer: TYROLIT Hydrostress AG © TYROLIT Hydrostress AG Witzbergstrasse 18 TYROLIT Hydrostress AG reserves all rights. Any CH-8330 Pfäffikon ZH reproduction, use or distribution of these original ope rating instructions or the translations of the original Telephone: +41 (0)44 952 18 18 operating instructions, in whole or in part, is prohi... -
Page 5: Important Notes
EN Floor grinding machine FGE 250 1 Important notes 1 Important notes 1.2 Liability and warranty TYROLIT Hydrostress AG The machine may be used only with the accessories supplied by the manufacturer for stripping, wet and All rights, including those pertaining to translation, lie dry grinding of floor surfaces such as: with TYROLIT Hydrostress AG. -
Page 6: Safety Instructions
EN Floor grinding machine FGE 250 2 Safety The manufacturer and owner of the machine must Risk of injury from rotating machine parts! Limbs and clothing can be drawn in! observe the contents and provisions of the EC direc Proceed with the greatest care and caution! tives. -
Page 7: Operation
EN Floor grinding machine FGE 250 3 Operation 3 Operation Always use ETX diamond tools or abrasive bonding for the surface to be machined (e.g. some surfaces have to be ground wet). Check the surface to be ground and remove any protruding objects. -
Page 8: Grinding
EN Floor grinding machine FGE 250 3 Operation 3.3 Switching the machine off The power socket serving as the electric supply should be installed and provided with mains cur rent according to local regulations! Observe the safety instructions in Chapter 2! -
Page 9: Troubleshooting
EN Floor grinding machine FGE 250 4 Troubleshooting 4 Troubleshooting Only suitably knowledgeable, qualified profes sional technicians may perform repairs on the machine. Malfunction Cause Rectification Machine will not start. Connecting cable for the voltage sup Plug power plug [16, Fig. D] into the ply is not properly connected with the socket. -
Page 10: Cleaning The Machine
EN Floor grinding machine FGE 250 6 Acceptance and transport 6 Acceptance and transport 12. Firmly screw in the three clamping screws [24, Fig. H]. 13. Set the machine upright. 6.1 Accepting the machine 14. Insert the assembly tool back into the machine console [9, Fig. -
Page 11: Technical Data
EN Floor grinding machine FGE 250 7 Technical data 8 Declaration of conformity The machine can be fastened to pallets to protect it against damages. Relocation over short distances is possible on the transport wheels. TYROLIT Hydrostress AG Witzbergstrasse 18 Pull the power plug [16, Fig. - Page 12 TYROLIT Hydrostress AG Witzbergstrasse 18 CH-8330 Pfäffikon ZH Switzerland Telefon: +41 (0)44 952 18 18 Telefax: +41 (0)44 952 18 00 URL: www.tyrolit.com...
- Page 13 19 Rohrstutzen [19] 20 Montagewerkzeug [20] 21 Radachse[21] 22 Werkzeugträger [22] 23 ETX-Diamantwerkzeuge [23] 24 Klemmschraube [24] für den Sicherungsring TYROLIT Hydrostress AG Witzbergstrasse 18 CH-8330 Pfäffikon ZH Switzerland Telefon: +41 (0)44 952 18 18 Telefax: +41 (0)44 952 18 00 URL: www.tyrolit.com...
- Page 14 H Fig. H I Fig. entfällt J Fig. J K Fig. K L Fig. L M Fig. M TYROLIT Hydrostress AG Witzbergstrasse 18 CH-8330 Pfäffikon ZH Switzerland Telefon: +41 (0)44 952 18 18 Telefax: +41 (0)44 952 18 00 URL:...
Need help?
Do you have a question about the FGE 250 and is the answer not in the manual?
Questions and answers