Settings; Install Firmware Update; Individual Basic Settings; Switching On And Off Manually - BMW Advanced Car Eye 2.0 Instructions For Use Manual

Install firmware update

As soon as a firmware update is available, the
ACE 2.0 app will request that you install it.
Before installing an update of the ACE
2.0, your smartphone (min. 50 % battery
capacity) must be set to airplane mode
since otherwise incoming calls could
interfere with or interrupt the update.
A firmware update may result in the micro
SD card being formatted automatically.
In other words, all existing data may be
deleted. If necessary, back up the media
data on your micro SD card beforehand.
Your personal settings will remaining
place after a firmware update.

Switching on and off manually

Switch on the device by pressing the Power
•
button briefly when the ignition is on.
It can be switched off by pressing the Power
•
button for at least 3 seconds.

Settings

You can alter the default settings using the ACE
2.0 app to adjust the camera properties to suit
your personal requirements, your driving style
and the ambient conditions.

Individual basic settings:

Recording types
•
Triggering thresholds for the sensors
•
Selection of manual recording
•
Camera selection/image frequency
•
Microphone volume
•
Wi-Fi settings
•
There are also extended and information
settings:
Information display in videos:
•
–
Date
–
Time
–
GPS coordinates
–
Speed
–
Speed units
Switching the safety LED on and off
•
Switching the GPS function on and off:
•
–
Calculating driving speed
–
Location
–
Coordinates in the media data
Displaying the ACE 2.0 log file
•
General information about the product:
•
–
Operating manual
–
Data protection
–
Conditions for use
–
Legal notice
–
Software
If the speed indicator is active, excess
speeds may be documented in the
recorded media files.
39