Advertisement
Install the Replacement LCD:
Once the original LCD is completely removed, the replacement can be
installed in its place.
Since there is a slight difference in the depth of the LCD dimensions, the
LCD must be mounted differently than the original. Also, the top 4 pins on
the LCD must be covered in order to prevent them from shorting on the
metal mounting frame. Figure 13 indicates the pins which must be covered
and Figure 14 shows those pins covered with electrical tape.
In order to account for the difference in depth the replacement LCD must
be placed behind the mounting frame as shown in Figure 15. The top 2
screws must be screwed in from the backside as shown in Figure 16, 17
and 18. The bottom right screw can be screwed in from the front as shown
in Figure 17.
Once the replacement LCD is mounted in place, plug the cables in, as
shown in Figures 18, 19, and 20.
produced by: glitchscience.com
2014©
17
Advertisement
