1
Connect the speaker cables.
2
Connect the FM antenna.
Speaker
(right)
Setting the clock
IMPORTANT!
– To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY-ON 2 on the set for 3
seconds or more to switch to normal standby mode first before proceeding with the procedures below.
1
In standby mode, press and hold
2
When the hour digits flash, turn
remote to set the hours.
3
Press
again and the minute digits flash. Then turn
CLOCK
press
on the remote to set the minutes.
VOL+/-
4
Press
again to confirm the time setting.
CLOCK
3
Connect the power cord of the system.
AC power cord
on the remote.
CLOCK
on the system or press
VOLUME-/+
FM antenna
Tip
See the User Manual for how to
connect other equipment to this
system.
on the
VOL+/-
on the system or
VOLUME-/+
Speaker
(left)