After Installation; Care And Cleaning - Rangemaster CRUB3314WH Installation Manual

After installation

1.
Clean the sink using the attached care advice ready for
use.
2. Check the sink is flat to the worktop, straight and
level; pour a small amount of water onto the drainer (if
applicable) to check for drainage.
3. Close the plug(s) in all bowls, fill the sink with water
below the overflow and check the water does not leak
through or around the waste(s).
4.
Close the plug(s) in all bowls fill the sink with water
above the overflow, check the water exits though the
overflow and does not leak from the overflow system.
5.
Open the plug(s) and let water drain from the bowls,
check the connecting pipework does not leak.
6.
If the sink is not to be used for a period after installation,
cover the sink and tap to protect them from accidental
damage during further surrounding installation work.
7.
We recommend once fully set, the silicone seal
should be checked for water tightness and rechecked
periodically.

Care and Cleaning

To maintain the appearance of this product, ensure that it
is regularly cleaned using only a clean, soft damp cloth. A
solution of warm water and a mild liquid non-antibacterial
detergent may be used where necessary, and then the
product rinsed thoroughly and wiped dry. Any other cleaning
action will invalidate your warranty.
No household or industrial chemicals should come into
contact with this product to prevent damage.
To prevent staining or discolouration of the product always
rinse the sink with water after use, if you live in a hard water
area we suggest you also wipe the sink dry.
Do not cut, slice or chop directly onto the sink as you may
mark the surface finish. Avoid the use of plastic washing up
bowls as engrained grit on the bowl underside may mark the
surface finish. Avoid impacting the product with sharp or
heavy objects, such as knives, pans or cooking pots and also
avoid contact with abrasives. No hot objects should be placed
directly onto the sink surface. Avoid contact with cycles of
very hot and cold substances.
For further care and maintenance advice on removing
stubborn marks and more examples of objects or actions
likely to artificially shorten the life of this product please visit
our website.
6