Rangemaster CRUB3314WH Installation Manual page 5

Inset sink
CRUB3314WH/ (Fig. 1.11)
CRUB3216WH/ (Fig. 1.12)
CRUB4040WH/ (Fig. 1.13)
CRUB5340WH/ (Fig. 1.14)
CRUB385WH/ (Fig. 1.15)
CRUB1740WH/ (Fig. 1.16)
• The cut out details are shown in (Fig. 1.11) or (Fig. 1.12)
ensure perfect positioning of this product. The cutout
template is also available online www.rangemaster.
co.uk.
• When installing as an Inset Sink, a chamfer in the
underside of the worktop may be required for the
overflow body (Fig. 1.17).
Applying the Silicon sealant
• Apply silicone sealant (not supplied) to the underside of
the sink rim (Fig. 1.18).
• Turn the sink over and feed into pre-prepared cut-out
(Fig. 1.19).
• Remove any surplus sealing material or wipe away any
excess sealant.
4