Available Accessories; Permanent Installation - Siemens Sitraffic Sensus Unit C3077 Instruction Manual

12 Available accessories / 13 Permanent installation

12 Available accessories

The power supply cable for permanent installation is available at the after-sales service of
your operating company.
Danger of fire and malfunction!
Always use accessories which are approved for the intended purpose
and do not make any changes to them.

13 Permanent installation

Connecting the power supply cable to the vehicle electrical system
Connection of the Sitraffic Sensus Unit power supply cable to the vehicle electrical
9
system (as shown in the related figure) has to be done by authorised staff only!
Working on a vehicle (and especially on a vehicle electrical system) can
cause danger. All work must be carried out by authorised staff!
Always observe the instructions and recommendations of the vehicle
manufacturer when working on a vehicle electrical system.
Connecting the Sitraffic Sensus Unit to the external power supply cable
22
1. Remove the connector panel cover of the device.
2. In case of already mounted cable for temporary
installation: Make sure that the cable is not con-
nected to the vehicle electrical system and that
the plug's snap catch is released when pulling out
the connector of the power supply cable.
3. Plug the provided power supply cable into the
power socket and make sure that the plug's snap
catch has engaged.
4. Make sure that the corrugated tube of the
provided power supply cable is located at the
right position.
5. Close the device again with the connector panel
cover.
© Siemens Aktiengesellschaft Österreich
Sitraffic Sensus Unit
Instruction Manual