Siemens Sitraffic Sensus Unit C3077 Instruction Manual page 12

8 Mounting and installing the Sitraffic Sensus Unit
Determine the Sitraffic Sensus Unit mounting location
Determine the mounting location on the inside of the windscreen such that:
• the driver's field of vision is not impaired while driving,
• the chosen position must not be near moving parts e.g. air bag covers of the
vehicle,
• the Sitraffic Sensus Unit is visible from outside and is not hidden by other
elements such as windscreen wipers when off,
• the Sitraffic Sensus Unit does not constrain the function of the defroster vents,
• in the case of metalized windscreen use non-metalized area,
• local laws and regulations as well as recommendations of the vehicle manufac-
turer are complied with.
In case of doubts please contact the after-sales service of your operating company for
support.
Danger of accident!
Always mount the Sitraffic Sensus Unit in such way that driver's field of vision is
not impaired!
Attaching the holder to the windscreen
1. The determined location on the windscreen and the contact surface of the
suction cups must be clean, dry and free from oil and grease. If necessary,
carefully clean with the supplied cleaning cloth and wait until the surface is dry
before to proceed with the next step.
2. Attach the holder at the chosen position with the suction cups. Press firmly at
the centre of each suction cup.
When using the suction cups you must check for correct fitting before each jour-
ney.
The service life of the suction cups is typically 6 months if the suction cups are
used on the windscreen.
12
Sitraffic Sensus Unit
Instruction Manual
© Siemens Aktiengesellschaft Österreich