Installation In Vehicles Transporting Dangerous Goods (Adr Vehicles); Mounting And Installing The Sitraffic Sensus Unit - Siemens Sitraffic Sensus Unit C3077 Instruction Manual

Sitraffic Sensus Unit
Instruction Manual
7 Installation in vehicles transporting
dangerous goods (ADR vehicles)
Danger of explosion! Installation in ADR vehicle is a case for fixed installation
and must only be performed by authorised staff! If you wish to install the
device into an ADR vehicle please contact the after-sales service of your
operating company for support.
8 Mounting and installing the Sitraffic Sensus Unit
Mounting the suction cups to the holder
Attach the provided suction cups to the holder as shown in the related figure.
Connecting the power cable to the Sitraffic Sensus Unit
1. Remove the connector panel cover of the device.
2. Plug the provided power supply cable into the power socket and make sure
that the plug's snap catch has engaged.
3. Make sure that the rubber tube of the provided power supply cable is located
at the right position.
4. Close the device again with the connector panel cover.
Danger of fire and malfunction!
Always protect the power supply cable against mechanical forces and other
negative factors (e.g. extensive heat, aggressive chemicals) which could
lead to destruction of isolation and short circuits.
Replace damaged cables immediately!.
© Siemens Aktiengesellschaft Österreich

7 Installation in vehicles transporting dangerous goods (ADR vehicles) /

8 Mounting and installing the Sitraffic Sensus Unit
11