Reboot; Factory Default - Ganz G2 THERMAL ZNT1-P Series Installation Manual

ZNT1-­‐P S eries

6.3. Reboot

Perform t he f ollowing p rocedures t o r eset y our d evice:
1. Press t he R eset b utton f or 2 s econds w hile t he d evice i s i n u se.
2. Wait f or t he s ystem t o r eboot.
!
Please do not hold the reset button for more than 2 seconds. Otherwise, the
camera m ay b e s witched t o i ts F actory D efault s ettings.
Caution

6.4. Factory Default

Resetting the device back to the factory default will initialize all parameters including the IP
address b ack t o t he f actory d efaults. T o r eset b ack t o t he f actory d efault:
1. Press t he r eset b utton a nd h old i t w hile t he d evice i s i n u se.
2. Release t he b utton a fter 1 0 s econds.
3. Wait f or t he s ystem t o r eboot.
The f actory d efault s ettings c an b e i nferred a s f ollows:
IP a ddress:
i
Network m ask:
Gateway:
Note
User I D:
Password:
192.168.xx.yy
255.255.0.0
192.168.0.1
root
pass
CBC A merica L LC.
ZNT1-P Installation Guide
18