Table of Contents
Advertisement
Connect FM antenna
Tip
•
For optimal reception, fully extend and adjust
the position of the antenna.
•
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL jack.
•
The unit does not support MW radio reception.
1
Connect the supplied FM antenna to the
FM AERIAL jack on the main unit.
Connect power
Caution
•
Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage
printed on the back or the underside of the
unit.
•
Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
•
Before you connect the AC power cord, ensure
that you have completed all other connections.
10
EN
1
Connect the power cord to the AC~ jack
on the main unit.
2
Connect the power plug to the wall
outlet.
Prepare the remote control
Caution
•
Risk of explosion! Keep batteries away from
heat, sunshine or À re. Never discard batteries
in À re.
For À rst-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control batteries:
1
Open the battery compartment.
2
Insert one lithium CR2025 battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
Note
•
Before you press any function button on the
remote control, À rst select the correct source
with the remote control instead of the main
unit.
•
If you are not going to use the remote control
for a long time, remove the battery.
Advertisement
Table of Contents
