Advertisement
Press
again to switch the unit to standby
mode.
» The clock (if set) appears on the display
panel.
Press and hold
for more than 3 seconds.
» The backlight on the display panel turns off.
» The red Eco Power indicator turns on.
Press and hold
for over 3 seconds.
‡
The unit switches to Eco Power Standby mode
after 15 minutes in standby mode.
In the standby mode, press and hold
for over 3 seconds to
activate the clock setting mode.
» The hour digits are displayed and begin
to blink.
Press
/
to set the hour, and then
press
» The minute digits are displayed and
begin to blink.
Press
/
to set the minute, and then
press
clock setting.
In standby mode, press
select different brightness levels.
16
again.
WR FRQÀUP WKH
repeatedly to
Press
to switch to disc mode.
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
‡
Go to the lowest channel on your
TV, and then press the Channel
Down button until you see the blue
screen.
‡
Press the source button repeatedly
on the remote control of your TV.
‡
The video-in channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, VIDEO etc. See the TV user
manual on how to select the correct input on
the TV.
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
Press
Select [
].
Select [
], and then press
Select a setting and then press
‡
[
] - For TV with NTSC color
system.
‡
[
] - For TV with PAL color
system.
‡
[
] - For TV that is compatible
with both PAL and NTSC.
To return to the previous menu, press
.
To exit the menu, press
.
.
.
.
Advertisement
