OVERVIEW AND PART NAMES Front cover Prefilter Filter* BONECO P400 Touch display Fragrance container Power cable * Depending on the model, a “BABY”, “SMOG” or “ALLERGY” filter type is included in standard delivery...
PUT TING INTO OPER ATION Remove the magnetically attached front cover. Take off the prefilter. Take out the filter and remove the protective foil. Reattach the front cover. Insert the filter back into the holder Put the prefilter back on. (note the markings).
Page 4
MAGNETIC FRONT COVER NOTES ON THE FILTERS REPLACEMENT FILTERS The BONECO P400 front cover is held on by magnets. The Your BONECO P400 was shipped from the factory with You can get the replacement filters at your BONECO spe air purifier does not switch on if the front cover is missing the “ALLERGY”, “SMOG”...
Press and hold the button P400 is used in a dark room (such as a bedroom). for five seconds to hide the symbol. This also resets the counter for the new filter at the same time.
BASIC FUNCTIONS The BONECO P400 can easily be adapted to suit your MANUALLY CONTROLLING THE FAN LEVEL USING FRAGRANCES needs. Whenever you switch off the unit, all settings are The fan level of the BONECO P400 can be controlled The fragrance container for adding fragrances is on the saved until the next use.
The The prefilter prevents excessive dust accumulation from filter must be replaced at this point to continue to ensure getting inside the BONECO P400. optimal air purification. 1. Clean the prefilter under running water or using a The filter must be replaced as soon as possible after the vacuum cleaner.
INSTRUCTIONS D’UTILISATION DU BONECO P400 CHER CLIENT, CONTENU DE LA LIVRAISON Nous vous félicitons pour l’achat du BONECO P400. Ce purificateur d’air à haute efficacité est équipé d’un triple système de filtration, qui libère l’air non seulement des odeurs mais aussi de la poussière, du pollen et des parti...
Need help?
Do you have a question about the P400 and is the answer not in the manual?
Questions and answers