TABLE OF CONTENTS Overview and part names Items included Technical data Start-up Front cover and replacement filter Magnetic front cover Replacement filters Indicators on the display Clearing the filter warning Basic functions “Auto” mode Air quality indicator Manually controlling the fan level Ionizer and timer function Ionizer Timer function...
BONECO P340 with country- Filter A341 The BONECO P340 is designed for easy, fully automated specific power cable operation. The smart control system ensures that the noise level remains as low as possible. Thanks to the in- tegrated timer, the appliance also runs whenever you are not at home.
START-UP Remove the magnetically fixed front cover. Take off the pre-filter. Take out the filter and remove the protective foil. Reattach the front cover. Insert the filter back into the holder Put the pre-filter back on. (note the markings).
FRONT COVER AND REPL ACEMENT FILTER MAGNETIC FRONT COVER REPLACEMENT FILTERS The front cover of the BONECO P340 is held on by mag- You can obtain replacement filters from your BONECO nets. The air purifier is not switched on if the front cover specialist dealer or in the online store at: is missing or positioned incorrectly.
INDICATORS ON THE DISPL AY Indicators Meaning Ionizer is switched on or off Timer function (1, 2, 4 or 8 hours) Display of air quality (green, orange, red) All displays on the appliance AUTO mode and fan level Filter used up, replace CLEARING THE FILTER WARNING The “Filter”...
During start-up of the appliance, the basic setting of the The air quality is measured by the built-in sensor The fan level of the BONECO P340 can be manually con- fan level is in automatic mode (AUTO MODE). and is visualized by different colors on the “air” display.
The ionizer is activated by pressing the “ION” button The timer function lets you determine how long the 1. Switch on the BONECO P340 by pressing the once. Pressing the button again switches off the ionizer. BONECO P340 should run before it switches off auto- button.
The pre-filter prevents excessive dust accumulation from cleaning. illuminated. The filter must now be replaced to continue getting inside the BONECO P340. to ensure optimal air purification. 1. Clean the pre-filter under running water or using a The procedure for replacing the filter corresponds to the vacuum cleaner.
Need help?
Do you have a question about the P340 and is the answer not in the manual?
Questions and answers