Omega Research & Development Omegalink Quick Start Operation Manual page 2

REMOTE START FUNCTIONS
FUNCTION BUTTON(S)
Engine Start/Stop
Take Over*: Enter the vehicle and turn ignition key 'ON' then press the brake pedal.
x 2
Run Time Extender*
This will restart the remote start run timer (only allowed once per remote start cycle).
Auto Start Mode*
Remote starts your vehicle every 2, 3, or 4 hours (programmable) or upon temperature threshold.
&
WINDOW-MOUNT ANTENNA/RECEIVER
Valet / Programming Button
*All functions are dependent upon vehicle & system availability. Consult your installer to confirm feature availability.
2
5-BUTTON 1-WAY
QUICK START OPERATION GUIDE
NOTE
Status LED
Status LED
AUXILIARY REMOTE FUNCTIONS
FUNCTION BUTTON(S)
Remote Valet*
Will put the system into valet mode. This disables remote start and any security functions.
Hold & for 3 sec.
The LED flash upon any button press will indicate current car setting. 1 flash = car 1 / 2 flash = car 2.
Multi-Car
Hold & for 3 sec Repeat to return to car 1.
Button Lock
When button lock is on the remote will not transmit. When any button is pressed the LED will flash rapidly uopn button press.
&
Hold for 3 sec
AUX1 - Write function in "FUNCTION" column
,
x 2 , AUX2 - Write function in "FUNCTION" column
AUX3 - Write function in "FUNCTION" column
x 3 ,
AUX4 - Write function in "FUNCTION" column
&
*All functions are dependent upon vehicle & system availability. Consult your installer to confirm feature availability.
5-BUTTON 1-WAY
QUICK START OPERATION GUIDE
NOTE
3