Related Manuals for Omega Research & Development Excalibur RS-130-DP
Summary of Contents for Omega Research & Development Excalibur RS-130-DP
- Page 1 RS-130-DP Deluxe Keyless Entry & Remote Start July 28, 2010 Operation Guide Temporary cover. Color cover is in a separate file.
- Page 2 Table Of Contents Remote Start Features ................3 Low Battery/Low Temp Automatic Starting ........3 Turbo Timer Feature ................3 Pit-Stop Feature ................3 Using The Valet Switch ................3 The Status Light ..................4 Programming Features ................4 User Programmable Features ...............5 Installer Programmable Features ............5 Programmable Features Matrix .............7 Introduction Congratulations on your purchase of this convenience system by Omega...
-
Page 3: Turbo Timer Feature
Remote Start Features LOw BaTTERy/LOw TEmP auTOmaTIC STaRTING This feature will automatically start the engine should the vehicle battery drop below 11 volts or the interior temperature drop to 15 (or 32) degrees fahrenheit. This feature is very useful when the vehicle is parked for a long period of time in cold cli- mates. - Page 4 The Status Light The Status Light helps to visually confirms the status of the system and provides a high level of visual deterrence. The Status Light is located in the window mount receiver unit. Normal System Status 1) Off = The remote starter system is off, in standby mode. 2) On Constant = The system is in the Valet Mode & remote start is disabled. Starting System Status The Status Light also indicates the remote start status: 3) Flashing Slow (once per second): Remote start is on.
- Page 5 user Programmable Features This group of User Programmable Features are all accessed as a group in the first level of features’ programming. These features have a direct affect upon the sys- tem’s operations, so the programming and operation of each are described. Feature #1 Remote Start Run Time 10 minutes (press the brake pedal 1 time to program) - DEFauLT 5 minutes (press the brake pedal 2 times to program) 15 minutes...
- Page 6 Installer Programmable Features (cont’d) looks for a voltage increase of 0.5v after cranking. “Tach wire” Before this setting is programmed, refer to the “Violet/White wire” sec- tion of the installation manual for proper wiring connection and the Tach Learn Pro- cedure.
- Page 7 Installer Programmable Features (cont’d) Feature #6 Low Temp Crank Extender 0ms (Off) (press the brake pedal 1 time to program) 200ms (press the brake pedal 2 times to program) - DEFauLT 300ms (press the brake pedal 3 times to program) 400ms (press the brake pedal 4 times to program) When the vehicle’s interior temperature is below freezing, this feature adds extra...
- Page 8 Back Cover Color cover is in a separate file.
Need help?
Do you have a question about the Excalibur RS-130-DP and is the answer not in the manual?
Questions and answers