Wiring And Electric Diagrams - Pitsan ETA Series Installation, Operation & Maintenance Instructions Manual

Electric heating units
Table of Contents

Advertisement

HORIZONTAL DISCHARGE:
To ensure proper heating of floor surfaces, observe the following recommended mounting
limitations
Minimum recommended mounting height (to bottom of heater):
2meters
Maximum recommended mounting height (to bottom of heater):
4,5meters
Minimum clearance from walls and ceiling are (Z) :
250mm
VERTICAL DISCHARGE:
To ensure proper heating of floor surfaces, observe the following
recommended mounting limitations
X: 250mm
Y: 250mm
Z: 250mm
KANALA MONTAJ YAZILABİLİR

7.2. Wiring and Electric Diagrams

 Connect the heater only to the voltage and frequency specifi ed on the nameplate.
 Rough-in branch circuit wiring to the heater using wire rated for 75 degrees C. Wire heater
supply according to diagram in manual
 The unit is supplied with plugs, all wiring to be in accordance with local and national
electric codes.
PİTSAN MAK. SAN. VE TİC. LTD ŞTİ, Esenyurt Yolu Üzeri No: 66 - 68 Bağlar Mevkii, TR – 34850 Avcılar - İSTANBUL
Tel.: 0212/4281885, Fax: 0212/4281661, Email:pitsan@pitsan.com,
Operating
Instructions for
Electrical Heater Units
http: //www.pitsan.com
PITSAN
Page 9 / 16

Advertisement

Table of Contents
loading

Table of Contents