Table of Contents
Advertisement
-
- Do not use outdoors
- Heater contains arcing and sparking parts. Do not use it in areas where
gasoline, paint, or fl ammable liquids are used or stored.
- Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or injury to persons.
6 PACKAGING, HANDLING, STORAGE
The units are packed in carton boxes and made ready for shipments on pallets. It is
essential that great care is exercised when handling the unit. When handling the equipment,
care should be taken with corners and edges and that the weight distribution within the unit is
considered.
The units should be stored indoors away from humidity.
7
COMMISSIONING
For the first-commissioning it is recommended to use our specialist personnel
7.1. Installation
HEATER LOCATION: Unit heaters should be located along outside walls to provide
perimeter air circulation. The discharge air should wipe the walls without blowing directly on
them.
a. Small rooms - can be heated by one or two units. Locate the unit heater(s) to provide
circular air movement within the space.
b. Large rooms - requiring multiple unit installations. Units should be located so that the
discharge air from one unit supports the discharge from another unit and provides a circular
air movement.
PİTSAN MAK. SAN. VE TİC. LTD ŞTİ, Esenyurt Yolu Üzeri No: 66 - 68 Bağlar Mevkii, TR – 34850 Avcılar - İSTANBUL
Tel.: 0212/4281885, Fax: 0212/4281661, Email:pitsan@pitsan.com,
Instructions for
Electrical Heater Units
Do not heat air containing combustible materials
Operating
http: //www.pitsan.com
PITSAN
Page 8 / 16
Advertisement
Table of Contents
