Technical Specifications; Data Security And Disclaimer; Safe Termination After Use Of The Kobra Stick - Digittrade KOBRA STICK User Manual

The activated write protection of the KOBRA Stick data carriers provides secure
protection from the unwanted flow of information from higher-rated systems to lower-
rated systems.
To achieve this, the data from the source system is written onto the data carrier and
then the write protection is activated on the stick. Then the data carrier is connected to
the higher-rated system and the required data is transferred from the KOBRA Stick to
the host system. Afterwards, the data carrier can be used normally in the source system
again.
Any further security measures such as a virus-scan are still required. Optionally, the
data carrier can be deleted fast and securely before and afterwards by regenerating the
encryption keys.

8. Technical specifications

Transfer rate:
Encryption:
Storage:
Storage type

9. Data security and disclaimer

We recommend that you also regularly back up the data on the KOBRA Stick on other
storage media. This will protect you from complete data loss. DIGITTRADE GmbH is
not liable for the loss of data or costs and damages resulting therefrom. In addition,
the aforementioned company is not responsible for the stored data with respect to data
protection law.

10. Safe termination after use of the KOBRA Stick

For security reasons, the stick must be separated virtually or physically from the host
system after use. This is recommended especially in the case of termination, short-term
22
USB 3.0 max. 5 GBit/s
USB 2.0 max 480 MBit/s
The actual write and read rate that can be achieved depends
on the selected memory size, memory type, USB port and
host system.
256-Bit AES hardware encryption,
XTS mode, with 2 x 256-bit crypto keys
4 GB, 8 GB, 16 GB, 32 GB, 64 GB, 128 GB, 256 GB, 512 GB
3D TLC, MLC and pSLC