To Deactivate Progressive Manually - Philips MCD708/05 User Manual

Philips dvd micro theatre mcd708
Hide thumbs Also See for MCD708/05:
Table of Contents

Advertisement

6
Press 1 2 repeatedly to select "VIDEO
SETUP PAGE".
7
Select "TV MODE" to "P-SCAN", then OK to
confirm.
The instruction menu appears on the TV.
8
Press 1 2 to highlight OK in the menu and
press OK to confirm.
There will be a distorted picture on your
TV at this state until you turn on the
progressive scan mode on your TV.
9
Turn on your TV progressive scan mode (refer
to your TV user's manual).
The below menu appears on the TV.
0
Press 1 2 to highlight OK in the menu and
press OK to confirm.
The setup is complete now and you can start
to enjoy the high quality picture.

To deactivate Progressive manually

When the distorted sign still appears on
the TV, it may be due to the connected TV
does not accept progressive signals, and
progressive is set by mistake. You must reset the
unit to interlace format.
Getting Started
1
Turn off your TV progressive scan mode or turn
on to interlaced mode (refer to your TV user
manual).
2
Press SYSTEM on the remote control to exit
the system menu and then press DISC to exit
progressive scan.
The DVD blue background screen will appear
on the TV.
Note:
– In the progressive scan mode, pressing DISC
button during normal playback will exit the
progressive scan mode.
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcd708/12Mcd708

Table of Contents