Table of Contents
Advertisement
Connections
Step 6: Connecting the power
cord
After everything has been connected
properly, plug in the AC power cord to
the power outlet.
Never make or change any connections with the
power switched on.
Additional: Connecting
additional equipment
IMPORTANT!
– Some discs are copy-protected. You
cannot record the disc through a VCR or
digital recording device.
– When making connections, make sure
the colour of cables matches the colour
of jacks.
– Always refer to the owner's manual of
the other equipment for complete
connection and usage details.
14
Viewing and listening to the playback of
other equipment A
●
Connect the AUX IN (R/L) jacks on the
system to the AUDIO OUT jacks on the other
audio/visual device (such as a TV, VCR, Laser Disc
player or cassette deck).
Before operation, press SOURCE on the front
panel to select AUX or press AUX on the
remote control in order to activate the input
source.
Using the VCR for recording DVDs B
●
Connect one of the VIDEO jacks on the system
to the corresponding VIDEO IN jack and the
LINE OUT (R/L) jacks to the AUDIO IN jacks
on the VCR. This will allow you to make analogue
stereo (two channels, right and left) recordings.
Recording (digital) C
●
Connect the COAXIAL or OPTICAL jack
on the system to the DIGITAL IN jack on a
digital recording device (such as a DTS-Digital
Theatre compatible, with Dolby Digital decoder).
Before operation, set the DIGITAL OUT
according to the audio connection. (See
"DIGITAL OUT".)
Connecting an active subwoofer D
●
Connect the SUBWOOFER jack on the DVD
micro system to the AUDIO INPUT jack on an
active subwoofer (not supplied).
Hide quick links:
Advertisement
Table of Contents
