Download Print this page

Kenwood NX-5000 Initial Setup Manual page 12

Multi rf deck / multi control head; remote configuration

Hide thumbs Also See for NX-5000:

4. Write FPU Data file to each RF Deck separately

Note: Repeat this procedure for each RF Deck separately.

Note: Don't edit any programming set at

1) Connect Control Head 1 with one of the RF Decks using the KCT-71 cable.

2) Power on and connect the radio to the PC with the KPG-46U/46X.

3) Press "Write" Button.

4) Press OK Button.

Page | 12

procedure

#3.

NX-5000 Remote Configuration [Initial Setup Instruction]