Table of Contents
Advertisement
Step 7: Connecting the power
cord
After everything is connected properly,
plug in the AC power cord to the power
outlet.
Switch on the power on the back of the
subwoofer.
Never make or change any connection with the
power on.
Additional: Connecting
additional equipment
IMPORTANT!
– Some discs are copy-protected. You
cannot record the disc through a VCR or
digital recording device.
– When making connections, make sure
the colour of cables matches the colour
of jacks.
– Always refer to the owner's manual of
the other equipment for complete
connection and usage details.
Viewing and listening to the playback of
other equipment A
●
Connect the system's AUX IN jacks to the
AUDIO OUT jacks on the other audio/visual
device (such as a TV, VCR, Laser Disc player or
cassette deck).
Before starting operation, press SOURCE on
the front panel to select AUX or press AUX on
the remote in order to activate the input source.
Using the VCR for recording DVDs B
●
Connect one of the system's VIDEO jack to the
corresponding VIDEO IN jack and AUDIO
OUT L/R jacks to the AUDIO IN jacks on the
VCR. This will allow you to make analogue stereo
(two channel, right and left) recordings.
Recording (digital) C
●
Connect the system's COAXIAL jack to the
DIGITAL IN jack on a digital recording device.
Before star ting operation, set the DIGITAL OUT
according to the audio connection. (See
"DIGITAL OUT".)
Connections
15
Advertisement
Table of Contents
