Table of Contents
Advertisement
Speaker
(right)
FM antenna
IMPORTANT!
– The type plate is located at the
bottom of the system.
– Before connecting the AC power cord
to the wall outlet, ensure that all
other connections have been made.
– Never make or change any
connections with the power on.
– To connect a cable to the
corresponding jack on the rear panel,
make sure to lead it through the square
hole of the stand.
– A separate power switch is provided
on the back of the subwoofer. Please
switch it on after completing all
connections in order to enjoy 2.1-channel
sound output.
Step 1: Connecting the
subwoofer
S-VIDEO
IN
AUDIO
TV IN
IN
VIDEO IN
Subwoofer
●
●
Connections
AC power
S-VIDEO
IN
AUDIO
IN
TV IN
VIDEO IN
AC power
Connect the subwoofer to the main unit with
the supplied system cable (grey).
Step 2: Placing the speakers
Front
speaker
( left )
VIEWING AREA
Place the front left and right speakers at equal
distances from the TV set and at an angle of
approximately 45 degrees from the listening
position.
Notes:
– To avoid magnetic interference, do not position
the front speakers too close to your TV set.
– Allow adequate ventilation around the DVD
System.
Speaker
(left)
Front
speaker
( right )
11
Advertisement
Table of Contents
