General Information; Applicability Of The Operating Instructions; Type Plate; Scope Of Delivery - oventrop OV-DMC 3 Operating Instructions Manual

"OV-DMC 3"
1.

General information

The original operating instructions were drafted
in German.
The operating instructions in other languages
have been translated from German.
1.1 Applicability of the operating
instructions
These operating instructions are valid for the
"OV-DMC 3" measuring system.

1.2 Type plate

Product information can be found on the front
of the "OV-DMC 3" sensor.
Manufacturer:
Oventrop
Serial number
Model
Max. differential
pressure
Max. working temp.
Protection class

1.3 Scope of delivery

Please check the delivery for any damage
caused during transit and for completeness.
1 2
6 7 8 9
Illust. 1: Scope of delivery
106927880-V02.03.2019
Oventrop
A001 (example)
"OV-DMC 3"
250 kPa
120 °C
IP64
3 4 5
10 11 12 13
General information
(1) 2 measuring adapters for differential
pressure measurement
(2)
2 measuring hoses with quick cou-
plings (labelled red and blue)
(3)
2 replacement measuring nipples
(4)
2 measuring needles with "eco" mea-
surement technology
(5) Power supply with cable (under the
"OV-DMC 3")
(6) Document case, operating instructions
(7) "OV-DMC 3" sensor
(8) 3 mm Allen key
(9) 2 emptying and filling tools with "eco"
measurement technology
(10) 2 measuring needles with "classic"
measurement technology
(11) 2 measurement adapters with G ¾
connection thread
(12)
4 mm Allen key
(13)
2 PT1000 temperature sensors

1.4 Contact

Contact address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
GERMANY
Technical Services
Telephone: +49 (0) 29 62 82-234

1.5 Copyright and property rights

These operating instructions are copyrighted.
They are exclusively designed for persons
involved with the product.

1.6 Declaration of conformity

Oventrop GmbH & Co. KG hereby declares that
this product complies with the basic require-
ments and other relevant provisions of the EC
Directives concerned.
The declaration of conformity can be obtained
from the manufacturer.
EN
21