Advertisement
Setting the clock
IMPORTANT!
– To set clock in the Eco Power mode, press and hold ECO POWER/
STANDBY-ON 2 on the set for 3 seconds or more to switch to normal
standby mode first before proceeding with the procedures below.
1
In standby mode, press and hold
➜
SET CLOCK is displayed briefly. Then, the clock digits for the hours flash.
2
9
Press
on the remote control to select clock mode.
➜
"12 TO 24 HOUR" or "24 TO 12 HOUR" scrolls once. Then, the clock
digits for the hours continue to flash.
3
Adjust
VOLUME -/+
hours.
4
Press
again.
CLOCK/RDS
➜
The clock digits for the minutes flash.
5
Adjust
VOLUME -/+
minutes.
6
Press
CLOCK/RDS
C
Enjoy
Playing a disc
1
Press
OPEN/CLOSEç
button again to close the disc tray.
➜
Make sure the label side of the disc is facing up.
2
Press
É Å
to start playback.
3
To stop playback, press 9.
CLOCK/RDS
(or press
on the remote control) to set the
VOL +/-
(or press
on the remote control) to set the
VOL +/-
to confirm the time.
to open the disc tray and load in a disc, then press the same
on the remote control.
Advertisement
