Advertisement
5
INSTALLATION AND USE
CARRYING YOUR TROPHY CHAIR
To carry the Trophy Chair, first fold it flat. Next, take
the supplied green tourniquet buckle strap and wrap
it around the frame to secure it as shown in Figure 7.
Take the long cam buckle tree strap and bring it over
your shoulder. Clip the double J-Hook into the Support
Rod slide to secure as shown in Figure 8.
ATTACHING TO A TREE
Step 1. Wrap the cam buckle strap around the tree and
hook the double J-Hook into the seat frame as shown in
Figure 9.
Step 2. Pull the free end of the strap until tight.
Step 3. Push down on the chair to seat it on the tree.
Step 4. Wrap the supplied green tourniquet buckle
strap the frame and the tree to secure (See Figure 10).
Step 5. Secure the seat back to the tree by wrapping
the bungee cord around the tree and clipping it to its
self.
6
MAINTENANCE AND CARE
We recommend that your Trophy Chair be removed and stored in a dry place when not in use.
The powdercoat finish applied at the factory is very durable and should only need touch ups in areas of heavy wear or accidental
impact.
Should you damage any part of your Summit Treestand, contact your nearest authorized Summit dealer or the factory to obtain
the proper corrective action procedure and/or replacement parts for the treestand.
Look for nicks, gouges, cuts, cracks, bends, corrosion or similar damage that can be the result of improper use or accidental
damage. For instance, this could occur if someone else used the treestand without knowledge of its proper use, or if the
treestand were dropped, hit by a motor vehicle or subject to corrosive conditions, etc.
Summit Treestands have the highest structural integrity by design, material selection and manufacturing techniques, but as its
owner, only your continued care will assure trouble free performance. When the above-mentioned guidelines are followed, your
Summit Treestand will provide years of successful hunting.
7
WARRANTY
Limited Warranty
(A) Warranty
Summit Treestands, LLC (Summit) warrants to the original retail purchaser that all products manufactured by it are free from defects in material and
manufacture at the time of shipment for sixty (60) months from the date of purchase. Summit will repair or replace any part found defective if the unit
claimed to be defective shall be returned to Summit, postage prepaid, within the warranty period.
This warranty shall not apply to any product which has been subjected to misuse; misapplication; neglect (including but not limited to improper maintenance);
accident; improper installation; modification (including but not limited to use of unauthorized parts or attachments); adjustment or repair. THE FOREGOING
IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED (INCLUDING THOSE OF MERCHANTABILITY AND FITNESS OF ANY PRODUCT FOR A
PARTICULAR PURPOSE), AND OF ANY OTHER OBLIGATION OF LIABILITY ON THE PART OF THE COMPANY.
(B) Limitation of Liability
It is expressly understood that Summit's liability for its products, whether due to breach of warranty, negligence, strict liability, or otherwise, is limited to the
repair of the product, as stated above, and Summit will not be liable for any other injury, loss, damage, or expense, whether direct or consequential, including
but not limited to loss of use, income, profit, or damage to material, arising in connection with the sale, installation, use of, inability to use, or the repair or
replacement of Summit's products.
Summit reserves the right to make alterations or modifications in its products at any time, which in its opinion, may improve the performance and efficiency of
the product. It shall not be obligated to make such alterations or modifications to products already in service.
Please take the time to fill out the warranty card online at http://www.summitstands.com/warranty or fill out and mail in the enclosed warranty card.
9
www.summitstands.com
www.mysummitgear.com
CAUTION
!
© 2009 Summit Treestands, LLC
715 Summit Dr. Decatur, AL 35601
10
Advertisement
