Set clock
1
In the Eco Power standby mode, press
and hold PROGRAM/CLOCK to activate
the clock setting mode.
»
The hour digits are displayed and begin
to blink.
2
Press + VOL - to set the hour, then press
PROGRAM/CLOCK again.
»
The minute digits are displayed and
begin to blink.
3
Press + VOL - to set the minute, then
press PROGRAM/CLOCK to confirm
the clock setting.
» [SYNC RDS] (synchronize with
RDS clock) or [UNSYNC RDS]
(not synchronize with RDS clock) is
displayed.
4
Press + VOL - to choose [SYNC RDS] or
[UNSYNC RDS].
5
Press PROGRAM/CLOCK to confirm.
Find the TV input
1
Press
to turn on this player.
2
Turn on the TV and switch to the video
input (refer to the TV user manual on
how to select the A/V input).
Use the Home menu
1
Press
to display the home menu.
•
To start disc play, select
•
To view the USB contents, select
[Browse USB].
•
To access the setup menus, select
[Setup].
Navigate a menu
1
Button
OK
Select a menu display
language
•
1
2
3
[Play Disc].
4
When a menu is displayed, press the
buttons on the remote control to navigate.
Action
Move up or down.
Move left or right.
Confirm a selection.
Enter numbers/letters/
text.
Note
If this product is connected to an HDMI CEC
compliant TV, skip this setting. It switches
automatically to the same OSD menu language
as per your TV setting (if the language set on
TV is supported by this product).
In the Home menu, select [Setup] and
press OK.
Select [Preference], and press .
Select [Menu Language], and press .
Video
Audio
Network
EasyLink
Preference
Advanced
•
The language options may vary from
different regions.
Press
to select a language, and press OK.
EN
17