Connect Video/Audio Cables - Philips MBD3000/12 User Manual

For the speaker side:
1
Unscrew the speaker connectors.
2
For the left speaker, identify the speaker
cable that is connected to the left
connectors on the main unit.
3
Insert fully the red end of the speaker
cable into the red (+) connector.
4
Screw the red (+) connector to secure
the cable.
5
Insert fully the silver end of the speaker
cable into the black (-) connector.
6
Screw the black (-) connector to secure
the cable.
7
Repeat steps 2-6 for the right speaker.
a b

Connect video/audio cables

Select the best video connection that the TV
can support.
• Option 1: Connect to the HDMI jack (for
an HDMI, DVI or HDCP-compliant TV).
• Option 2: Connect to the component
video jacks (for a standard TV or
Progressive Scan TV).
• Option 3: Connect to the composite
video jack (for a standard TV).
12 EN
Option 1: Connect to the HDMI jack
AC ~
1
•
c
•
•
•
•
ANTENNA
LAN
DIGITAL AV OUT
COAXIAL
Pr/Cr
R
AUX
Pb/Cb Y OPTICAL
COMPONENT DIGITAL AUDIO OUT W i - F i IN
LINE
OUT
R
R
S P E A K E R O U T
HDMI
Connect an HDMI cable (not supplied)
to:
• the HDMI jack on this product.
• the HDMI input jack on the TV.
Tip
If the TV has a DVI connector only, connect via
an HDMI/DVI adaptor. Connect an audio cable
for sound output.
You can optimize the video output. Press the
HDMI button repeatedly to select the best
resolution the TV can support.
If this product connects to a TV compatible
with 1080p or 1080p/24Hz, Philips
recommends HDMI category 2 cable, also
known as High Speed HDMI cable, for optimal
video and audio output.
To play the digital video images of a BD-video
or DVD-video via an HDMI connection, it
is necessary that both this product and the
display device (or an AV receiver/amplifier)
support a copyright protection system called
HDCP (high-bandwidth digital content
protection system).
This type of connection provides best picture
quality.
FM
L
L
L
HDMI IN