Installation - IKEA FRAMTID HGA1K Manual

ENGLISH
Rating Plate
Made In Italy
© Inter IKEA Systems B.V. 1999
101-541-53
21552
PQM
ZO 0694
The graphic above represents rating plate of
the appliance (without serial number which is
generated dynamically during the production
process), which is located at its underneath
surface of the casing.

Installation

Manufacturer is not responsible for any injury
to persons and pets or damage to property
caused by failure to comply following require-
ments.
Caution! To proceed with the installation
refer to the assembly instructions.
Warning! Installation process must follow
the laws, ordinances, directives and
standards (electrical safety rules and
regulations, proper recycling in accordance
with the regulations, etc.) in force in the country
of use!
Ensure that the local distribution condi-
tions (nature of the gas and gas pressure)
and the adjustment of the appliance are com-
patible before proceeding with the installa-
tion.
The parameters of adjustment setting for
this appliance are stated on the rating
plate (refer to the Technical data chapter).
Warning! The appliance must be
earthed!
PNC. 949738162 TYPE H3MF1TC0-G/VI
G20 20 mbar = 4 kW
G20/G25 20/25 mbar = 4 kW
G31 37 mbar = 286 g/h
G30 29-30 mbar = 291 g/h
G30/G31 30/30 mbar = 291 g/h
G130 8 mbar = 3.7 kW
Dear Customer, please apply here aside the
sticker you can find in the dedicate plastic bag
inserted inside the hob packaging. This will al-
low us to assist you better, by identifying pre-
cisely your hob, in case you will need in future
our assistance. Thank you for your help!
Warning! Risk of injury from electrical
current.
• The electrical mains terminal is live.
• Make electrical mains terminal free of volt-
age.
• Loose and inappropriate plug and socket
connections can make the terminal over-
heat.
• Have the clamping connections correctly in-
stalled.
• Use strain relief clamp on cable.
Important! You must observe the minimum
distances to other appliances and furniture
cabinets or other units according to Assembly
Instruction.
If there is no oven beneath the hob insert a di-
viding panel at a minimum distance of 20 mm
from the bottom of the hob.
II2H3B/P (CZ-RO-SK-RU-TR-BG)
III1c2E+3+ (FR)
II2H3+ (IT-ES-PT)
~
230 V 50 Hz
8