Setting Up - LG HT963PA Manual

HT963PA-AP_DCANLLK_ENG_1109

Setting up

The speakers are detached from the speaker stands.
Assembling the Speakers
1 Draw the speaker cord through the hole on the speaker.
2 Attach the speakers to the speaker stands by rotating the screw.
Attaching the speakers to the DVD receiver
a a
You will have received six speaker cables.
Each one is color-coded by a band near each end and wires one of the
six speakers to the DVD receiver.
b b
Connect the wires to the DVD receiver.
Match each wire's colored band to the same colored connection terminal
on the reverse of the DVD receiver. To connect the cable to the DVD
receiver, press each plastic finger pad to open the connection terminal.
Insert the wire and release the finger pad.
Connect the red end of each wire to the
terminals marked +(plus) and the black
end to the terminals marked - (minus).
6/23/08 7:31 PM Page 5
c c
Connect the wires to the speakers.
Connect the other end of each wire to the correct speaker according to
:
the color coding
COLOR SPEAKER POSITION
Grey Rear Behind you and to your right.
Blue Rear Behind you and to your left.
Green Centre Above screen, directly in front of you.
Orange Sub Woofer
In front of you, to the right of
Red Front
the screen.
White Front In front of you, to the left of
the screen.
To connect the cable to the speakers, press each plastic finger pad to open the
connection terminals on the base of each speaker. Insert the wire and release
the finger pad.
Be careful of the following
Be careful to make sure children not to put their hands or any objects into the
*speaker duct.
*Speaker duct: A hall for plentiful bass sound on speaker cabi-
net(enclosure).
Do not fix the speaker cables in the hole on the speakers
Speaker decoration
This part of the device is made
just for design attraction.
5