Step 3 - Speaker Assembly - LG Nitro HD Disassemble Manual

Hide thumbs Also See for Nitro HD:

LG Nitro HD–Disassemble Guide

Step 1 – Battery

Step 2

Step 3 – Speaker Assembly

http://www.fixez.com/

•

Begin to disassemble the LG Nitro HD by

removing the back cover.

•

Insert the plastic opening tool in the notch that is

in the back cover of the phone. Pry at this point to

release the clips holding the cover down to the

phone.

•

With the back cover off, the battery is visible. Use

the plastic opening tool to lift up and remove the

battery from the LG Nitro HD.

•

With the back cover and battery detached, the

SIM and microSD cards are easily accessible.

Remove them from the phone.

•

The rear section of the case is secured by nine

Phillips screws (#00), locate and remove these

screws with the appropriate screwdriver.

Page 2 of 9

Table of Contents