First Use; Sabbath Mode - U-Line 2200 Series Quick Start Manual

QUICK START GUIDE
QUICK START GUIDE

First Use

All U-Line controls are preset at the factory. Initial startup
requires no adjustments.
NOTICE
U-Line recommends allowing the unit to run
overnight before loading with product.
When plugged in, the unit will begin operating under the
factory default settings. If the unit was turned off during
installation, simply press
switch on. To turn the unit off, press

Sabbath Mode

1 2
This unit is Star-K certified and offers a Sabbath mode.
Sabbath mode disables system responses to user initiated
activities and all external functions, including lighting,
display and audible alarms. The unit will still maintain
internal temperatures and set points. View a full list of
Star-K certified U-Line units at www.star-k.org.
To enable Sabbath Mode:
1. Press (4) and hold for ten seconds and release (the
°F/°C symbol will flash briefly at the end of the ten
second period).
2. The interior light and control display (3) will go dark
until user resets mode.
3. NOTE: Although the display will not be visible, the
temperature controls in the unit remain active and
preserve the interior temperature.
Sabbath Mode remains active until
pressed and released.
and the unit will immediately
.
3 4 5 6 7
(4) is quickly
Copyright © 2016/2017 U-Line Corporation. All Rights Reserved.
10
10
Publication Number 30632 11/2019 Rev. A
u-line.com
u-line.com