Program Radio Stations Manually; Select A Preset Radio Station; Other Features; Set The Alarm Timer - Philips DC190/12 User Manual

Program radio stations
manually
You can program a maximum of 20 preset
radio stations.
1
Tune to a radio station.
2
Press TIME SET/AUTO SCAN to activate
the program mode.
»
The preset number begins to blink.
3
Press PRESET +/- to select a number.
4
Press TIME SET/AUTO SCAN to
5
Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store
another station in its place.

Select a preset radio station

1
Press PRESET +/- to select a preset
number.

6 Other features

Set the alarm timer

You can set two alarms which go off at different
time.
1
Ensure that you have set the clock
correctly.
2
Press and hold ALARM 1 or ALARM 2
for 2 seconds.
»
or
blink.
3
Press TUNING +/- repeatedly to set the
hour.
4
Press ALARM 1 or ALARM 2
»
or
to blink.
10 EN
and hour digits begin to
and minute digits begin
5
Repeat steps 3-4 to set the minute.
6
Repeat steps 3-4 to select whether to
ring alarm on weekdays or at weekend.
»
"L XX(volume level)" begins to blink.
7
Repeat steps 3-4 to set the maximum
alarm volume.
Set alarm mode
1
Adjust the WAKE TO iPod/RADIO/
BUZZ control to select the source for
the alarm.
»
When the alarm time comes, the
selected iPod, radio or buzzer turns on.
Tip
If iPod source is selected but no iPod is loaded,
the buzzer is selected automatically.
Activate and deactivate the alarm
timer
1
Press ALARM 1 or ALARM 2 repeatedly
to activate the timer.
»
If the timer is activated,
displayed.
To deactivate the alarm timer, press
ALARM 1 or ALARM 2 repeatedly
until is displayed.
»
If the timer is deactivated,
disappears.
Repeat alarm
1
When the alarm rings, press REPEAT
ALARM/BRIGHTNESS CONTROL.
»
The alarm repeats ringing minutes later.
Tip
You can press TUNING+/- to adjust interval
to repeat alarm.
or is
or