Jamming - AccuBANKER AB550 User Manual

In order to ensure that the unit operates with optimal performance as well as to
prevent jamming, avoid the following:
• Counting bent or damaged coins.
• Counting any type of foreign objects such as clips, staples, paper, nylon,
rubber bands etc.
If any jamming occurs, the machine will stop counting and will move the turning
plate in reverse in order to remove the jammed object by itself.
In case the unit is unable to remove the object itself:
1. Please turn the power switch OFF and make sure that the unit is disconnected
from the power outlet.
2. Proceed to open the service window located on the back of the unit to get
access to the coins plate.
3. Inspect the coin plate and remove the obstruction.
4. Replace the service window to its original position.
5. Connect the unit back to the power outlet and turn the power
switch ON.
6. Confirm that the unit is now working properly.
7. If the issue persists, contact our technical support agent for further assistance.
13

. Jamming